Silicone Mold for Resin Casting. 

Size:

about 122mm wide, 156mm long, 4mm thick;

1: about 15mm wide, 20mm long;

2: about 30mm wide, 40mm long;

3: about 33mm wide, 46mm long;

4: about 29mm wide, 60mm long;

5: about 28mm wide, 48mm long;

6: about 40mm wide, 45mm long;

7: about 23.5mm wide, 32mm long;

8: about 14mm in diameter.

Easy to use. No releasing agent is needed, just pop out Your finished piece.

Our molds are made in Genuine Silicone, Clean Edge and Perfect Details. Scrapbooking, jewelry, charms, dollhouse miniatures and so on. 

♥ AREAS OF USE ♥

Plaster, Artist Clay, Wax, Cement, Casting Resins, Polymer Clay, Melt and Pour Soap, Low Melt Metals, Precious Metal Clay, Candles, Hot and Cold Processed Soap, Hot Melt Glue, and more...

♥ TEMPERATURE ♥

Our molds can withstand temperatures as high as 450 degrees F. (-60 degrees celsius to 220 degrees celsius). They are also unaffected and remain pliable when placed in the freezer.

♥ TIPS FOR USE ON CLAY ♥

Since different clays have different features, there are clays which are sticky than the others and so affect the pop out effect, in the case, we would recommend:

- For polymer clay, bake your clay right in the mold without concerns of clay distortion from de-molding.

-Put the caly into the fridge for around 5-10 minutes.

♥ CLEAN THE MOLD ♥

Our molds can be washed with hot, soapy water. They can also be put in the dishwasher or even boiled. But do not wash mold with abrasive pads or cleaning agents like Ajax cleanser.